|Max Flow Rate
|Upto 50 CUM
Kirlosar Double Stage Horizontal Spilt Case Pump with packed gland seal and CS / SS 410 shaft.Pump fitted with F
Flanged suction and delivery branches. Long coupled to a KOEL Radiator Water Fan Cool Diesel Engines capable of developing suitable Power Kw at required rpm (1500-1800 rpm).
Fitted on a MS Fabricated Skid base with integral fuel tank, Control Panel with Main & battery isolator MCB, Battery charger, PB / Key start electric and emergency stop button.
The engine is protected by a rain cover with the rear supports used as guttering to allow the water to exit at ground.
Ideal for flooded water supply applications for Oil Pipeline Line Pigging & Testing, Jetting or high pressure applications.
Can also be supplied with a Vacum Assisted automatic Priming Tank as self-priming pumping system for suction lifts upto 8.5m using a 60 CFM Vacuum Pump, at additional cost.
|up to 150 m
|up to 500 m3/h
|up to 180 deg C
End Suction Pump - GK
End section GK pumps conform to ISO: 5199 & dimensionally are fully conforming to ISO 2858/EN: 22858. These pumps equip a horizontal back pullout design and radially split, single stage, centrifugal end suction volute with top centerline delivery. Pump feet are integrally cast with delivery casing. Impeller is of an enclosed type. Bearing housing is fitted with a support foot. Pump shaft is supported by grease lubricated anti-friction deep groove ball bearings as a standard scope of supply. GK pumps are mainly used for clean and clear liquids, which are free from suspended solids particles.
SP BARE SHAFT
MATERIAL OF CONSTRUCTION