Kirloskar Water Pumps

DB

Kirloskar DB pumps are of back-pull-out design which enables to remove the rotating unit of pump for inspection and repairs without disturbing the pipe connections and motor by using spacer type coupling. The complete range of DB pump is covered by three driving units thereby reducing inventory and achieving interchangeability of parts. These DB water pumps are either gland packed or mechanically sealed.

APPLICATIONS

• Air-conditioning
• Booster service
• Circulation of water in industries
• Firefighting
• Lift irrigation
• Mine water
• Pumping brines, oils, etc. for liquids
• Sprinkler systems

   

SPECIFICATIONS

• Delivery size from 32 mm to 150 mm (11/4 to 6)
• Capacity up to 550 m3/hr. (2422 US gpm)
• Head up to 100 metres (320 ft.)
• Temperature (-) 10° C to 100° C

   

FEATURES

• Conforming to DIN 24255
• Back pull-out design
• Gland packed/mechanical seal
• 50HZ / 60 HZ availability

Product Details:

GK

GK pumps conform to ISO: 5199 & dimensionally are fully conforming to ISO 2858/EN: 22858. These pumps equip a horizontal back pullout design and radially split, single stage, centrifugal end suction volute with top centerline delivery. Pump feet are integrally cast with delivery casing. Impeller is of an enclosed type. Bearing housing is fitted with a support foot. Pump shaft is supported by grease lubricated anti-friction deep groove ball bearings as a standard scope of supply. GK pumps are mainly used for clean and clear liquids, which are free from suspended solids particles.

APPLICATIONS

• Water supply, hot water, drinking water
• Sprinkling and irrigation
• Air conditioning
• Industrial water
• Swimming pool water
• Firefighting
• Cooling water
• Condensate
• Clear juice

   

SPECIFICATIONS

• Delivery size from 65 to 125 mm
• Capacity from 20 to 450 m3/hr
• Head up to 60 metres
• Working pressure up to 16 bar
• Temperature up to 90° C

   

FEATURES

• Highly energy efficient
• Pump with mechanical seal & gland packing arrangement
• Sealing/flushing water not required
• Self-venting design
• Pump with back pull out design
• Compact design & wide interchangeability of components
• Shaft is fully protected from liquid

Product Details:

CPHM

Kirloskar CPHM pumps carry a back-pull-out design which enables removing the rotating unit of pump for inspection and repairs without disturbing the pipe connections. The complete range of CPHM water pump is covered by eight driving units thereby reducing inventory and achieving interchangeability of parts. These CPHM water pumps are either gland packed or mechanically sealed.

APPLICATIONS

• Air conditioning
• Firefighting
• Booster services
• Sprinkler system
• Irrigation

   

SPECIFICATIONS

• Delivery size from 20 mm to 200 mm (3/4 to 8)
• Capacity up to 750 m3/hr (3300 US gpm)
• Head up to 150 metres (480 ft.)
• Temperature (-) 30° C to 90° C

   

FEATURES

• Conforming to DIN 24256/ISO 2858
• Back pull-out design
• Gland packed/mechanical seal
• 50HZ/60HZ availability

CE

Kirloskar’s CE pumps are single stage pumps with a back-pull-out design, which enables to remove the rotating unit of pump for inspection and repairs without disturbing the pipe connections and motor by using spacer type coupling. The complete range of CE pumps is covered by four driving units thereby reducing inventory and achieving interchangeability of parts. These CE water pumps are either gland packed or mechanically sealed.

APPLICATIONS

• Air conditioning
• Condensate water supply
• Firefighting and booster services
• In sprinkler systems for handling clear and turbid water up to 3000 ppm

   

SPECIFICATIONS

• Delivery size up to 125 mm (5)
• Capacity up to 660 m3/hr (2906 US gpm)
• Head up to 100 metres (320 ft.)
• Temperature (-)10° C to 140° C

   

FEATURES

• Conforming to DIN24256 and ISO 2858
• Single stage with back pull-out type design
• Gland packed /mechanical Seal
• Suitable for 3500 rpm

UP/UPL/UPH/UP(T)

Kirloskar UP series are horizontal split casing type pumps with suction, discharge nozzles and their supporting feet integrally cast in the lower half casing. This construction enables to remove the rotating unit for inspection and repairs by just removing upper half casing and without disturbing alignment, pipe connection or prime mover.

SCT - Extended

SCT extended pumps are horizontally axially split casing, single stage pumps. SCT extended pumps are either double suction or single suction pumps with horizontal shaft and detachable stuffing box. The impeller is accurately balanced by a double or single suction.

DSM/DSMT

Kirloskar DSM/DSMT split case pumps are horizontally mounted and axially split casing type, two stage pumps. Split case construction enables to remove the rotating unit of the pump without disturbing pipe connections and alignment.

APPLICATIONS

• Air-conditioning
• Primary and Secondary (HVAC)
• Heating Ventilation
• Firefighting
• Irrigation
• Mine drainage
• Power plants
• Water supply

SPECIFICATIONS

• Delivery size from 50 mm to 150 mm
• Capacity up to 470 m3/hr
• Head up to 180 metres
• Temperature from 8° C to 90° C

FEATURES

• Gland packed/mechanical seal
• 50HZ/60HZ availability
• Good suction performance and low NPSH
• Vibration free performance

SCT

SCT pumps are horizontally axially split casing, single stage pumps. SCT pumps are either double suction or single suction pumps with a horizontal shaft and detachable stuffing box. The impeller is accurately balanced by a double or single suction.

MF

Kirloskar MF pumps are single stage, horizontal spindle volute type foot-mounted end suction pumps fitted with oil lubricated ball bearings and thrust bearing. These are low head and high capacity water pumps available with either horizontal or vertical delivery options. MF water pumps are provided with semi-open type mixed flow impeller. MF-E and MF-X pumps are provided with enclosed type mixed flow impeller.

APPLICATIONS

• Air-conditioning
• Drainage
• Irrigation
• Storm water

   

SPECIFICATIONS

• Delivery size from 200 mm to 650 mm (8 to 26)
• Capacity up to 7000 m3/hr (30,820 US gpm)
• Head up to 30 metres (90 ft.)
• Temperature 5° C to 140° C

   

FEATURES

• Low head, high capacity pumps
• Gland packed/mechanical seal
• 50HZ/60HZ availability
• Option available in horizontal as well as vertical delivery position

DBL

Kirloskar DB large pumps equip a back-pull-out design which enables to remove the rotating unit of pump for inspection and repairs without disturbing the pipe connections and motor by using spacer type coupling. The complete range of DB large pump is covered by three driving units thereby reducing inventory and achieving interchangeability of parts. These DBL water pumps are either gland packed or mechanically sealed with robust cast iron casing and are highly efficient. Bronze impeller makes DBL water pumps easy to maintain, reliable and long lasting.

APPLICATIONS

• Aqua culture
• Water supply
• Irrigation
• Sugar industries

   

SPECIFICATIONS

• Delivery size from 150 mm to 300 mm (6 to 12)
• Capacity up to 1900 m3/hr (8866 US gpm)
• Head up to 35 metres (112 ft)
• Temperature (-)10° C to 90° C

   

FEATURES

• Back pull-out design
• Gland packed/mechanical seal
• 50HZ/60HZ availability